ChIN简介页:美国能源部手册: Process Safety Management for Highly Hazardous Chemicals
首  页 | ChemDB Portal | 帮  助 | 论  坛 |  关于本站 | 动态网页


美国能源部手册: Process Safety Management for Highly Hazardous Chemicals


     The Office of Worker Health and Safety (EH-5) under the Assistant Secretary for Environment, Safety and Health of the U.S. Department of Energy (DOE) has published two handbooks for use by DOE contractors managing facilities and processes covered by the Occupational Safety and Health Administration (OSHA) Rule for Process Safety Management of Highly Hazardous Chemicals (29
CFR 1910.119), herein referred to as the PSM Rule. The purpose of the two handbooks, "Process Safety Management for Highly Hazardous Chemicals" and "Chemical Process Hazards Analysis," is to facilitate implementation of the provisions of the PSM Rule within the DOE.

This handbook provides information necessary to determine if a chemical process is covered by the PSM Rule (Rule for Process Safety Management of Highly Hazardous Chemicals, 29 CFR 1910.119) and provides an interpretation of the 14 elements of the PSM Rule. An overview of these elements is given in Table 1.1. This handbook also describes DOE programs that may, with or without modification, satisfy the requirements of this Rule. Questions and answers, based on OSHA's responses to questions from industry and labor, are provided at the end of most sections. Applicable question numbers are referenced in the text in brackets. Sample programs are included that may be used to satisfy provisions of the PSM Rule. These sample programs are adapted from industry and are not mandatory, even though some contain directive language (e.g., will, shall, should). Appendix D lists additional sources of detailed PSM information. For specific guidance on the Process Hazards Analysis element , the reader is referred to the handbook, "Chemical Process Hazards Analysis" (DOE-HDBK-1100-96).

The contents of the handbook are as following:

1.1 Purpose
1.2 Background
1.3 Application
2.1 Employee Participation
2.2 Process Safety Information
2.3 Process Hazard Analysis
2.4 Operating Procedures
2.5 Training
2.6 Subcontractor Safety
2.7 Pre-Startup Safety Review
2.8 Mechanical Integrity
2.9 Nonroutine Work Authorizations (Hot Work Permits)
2.10 Management of Change
2.11 Incident Investigation
2.12 Emergency Planning and Response
2.13 Compliance Audits
2.14 Trade Secrets
3.1 Defining Process Safety Management Policy, Goals, and Objectives
3.2 Process Safety Management Planning
3.3 Program Leadership and Implementation


U.S. Department of Energy AREA SAFT
Washington, D.C. 20585

Summary by 何莉 on 2003-12-03

Last updated by 何莉 on 2003-12-03

访问统计 | 软 件 | 论文专著 | 请留言 请在800x600分辨率以上,用IE4.0以上版本浏览
版权所有 © 1998 - 2015 中国科学院过程工程研究所